TS1100 Multimode Transmitter

The rugged multimode Telemetry Transmitters Series TS1100 offers PCM/FM, SOQPSK and multi-h modulation schemas. They are designed for operation within industrial, military and aerospace environments. The highly reliable and rugged design meets perfectly today's demands for small size, lightweight and high efficiency. STT's TS1100-series synthesizer controlled, multimode telemetry transmitters are best suited for transmitting wideband digital multiplex signals, video or telemetry. These transmitters are designed to meet IRIG-106 standards. There are several options available to meet specific frequency, data rate, modulation, programming, output power and environmental performance requirement.

 

NOTE:

Optional available:

1) IRIG Randomizer

2) Pre-Modulation Filter, remote programmable

Technical Specification


Frequency Range 2200 to 2500 MHz
Frequency Selection within 100MHz band programmable in 100kHz steps
Frequency Stability ≤ ± 0,002%
Output Power 1 to 10 Watts, min.
Output Impedance 50 Ohm
Harmonics, Spuria ≤ -60 dBc
Open/Short Protection yes, by internal isolator
Turn-on start-up time 1 sec. max.
Type PCM/FM, SOQPSK, multi-h
Input Data + Clock TTL or RS-422
Signal Range 1 to 40 Mbps (NRZ)
Power Supply 24 … 32 VDC
Rev. Voltage Protection yes, by internal serial diode
Overvoltage Protection for spikes up to 50 V/10 ms
Power Consumption 0.9A , typ. @ 28VDC (5 Watts)
RF Connector SMA -f
Mod./Power Connector HD-SUB 15
Dimensions 90 x 70 x 26 mm (L x W x H)
Weight approx. 300 grams
Temperature Range at base plate
operational: -20C to +70C (-40C to +85C)
storage: -55C to +95C
Relative Humidity 10% … 90% r.H., non-condensing
Shock 100 g, 11 ms, half sine, 3 axis
Vibration 20 grms, 10 Hz to 2000 Hz
Acceleration 100g
Altitude unlimited